Removal and Installation
- Ultima Oil Pump Reviews
- Ultima Oil Pump Harley
- Ultima Oil Pump Diagram
- Ultima Oil Pump Manual Transmission
- Ultima Oil Pump
Oil Pump Fits Nissan Altima Sentra 2.5 L QR25DE DOHC 2002-2015. Hitachi OEM Oil Pump VQ35DE 3.5 V6 Engine Fits VQ35DE Pathfinder - QX4 - Murano. DNJ OP644 Oil Pump For 01-15 Infiniti Nissan 350Z Altima 3.5L V6 DOHC 24v. With simple and proven designs, ZEELINE offers a wide assortment of Manual Pumps that fit any budget. Whether you’re pumping motor oil, automatic transmission fluid (ATF), gear oil, hydraulic fluid, or antifreeze; we have a pump that’s right for the job. All ZEELINE Manual Oil Pumps include our standard 2-year “”No Hassle”” warranty.
REMOVAL
1. Remove the timing chain. Refer to EM-163, 'Removal'.
2. Remove oil pump assembly.
INSTALLATION
Installation is in the reverse order of removal.
Disassembly and Assembly
1. Oil pump housing
2. Outer rotor
3. Inner rotor
4. Oil pump cover
5. O-ring
6. Regulator valve set
7. Regulator valve
8. Spring
9. Regulator plug
10. Oil strainer
CAUTION: Before assembly apply new engine oil to the parts as shown above.
DISASSEMBLY
1. Remove the oil pump cover.
2. Remove inner rotor and outer rotor from oil pump housing.
3. Remove oil strainer from oil pump housing.
4. After removing regulator plug, remove spring and regulator valve.
INSPECTION AFTER DISASSEMBLY
Clearance of Oil Pump Parts
• Measure clearance with feeler gauge.
• Clearance between outer rotor and oil pump body (position 1).
Standard : 0.114 - 0.260 mm (0.0045 - 0.0102 in)
• Tip clearance between inner rotor and outer rotor (position 2).
Standard : Below 0.180 mm (0.0071 in)
• Measure clearance with feeler gauge and straightedge.
• Side clearance between inner rotor and oil pump body (position 3).
Standard : 0.030 - 0.070 mm (0.0012 - 0.0028 in)
• Side clearance between outer rotor and oil pump body (position 4).
Standard : 0.050 - 0.110 mm (0.0020 - 0.0043 in)
• Calculate the clearance between inner rotor and oil pump body as follows.
1. Measure the outer diameter of protruded portion of inner rotor (position A).
2. Measure the inner diameter of oil pump body with inside micrometer (position B).
(clearance 5) = (inner diameter of oil pump body B) – (outer diameter of inner rotor A)
Standard : 0.045 - 0.091 mm (0.0018 - 0.0036 in)
Regulator Valve
1. Visually inspect components for wear and damage.
2. Check oil pressure regulator valve sliding surface and valve spring.
3. Coat regulator valve with engine oil. Check that it falls smoothly into the valve hole by its own weight.
If damaged, replace regulator valve set or oil pump body.
Ultima Oil Pump Reviews
Regulator Valve Clearance
(Clearance 6) = D (Valve hole diameter) – E (Outer diameter of valve)
Standard : 0.040 - 0.097 mm (0.0016 - 0.0038 in)
If it exceeds the standard, replace the oil pump body.
CAUTION: Coat regulator valve with engine oil.
Check that it falls smoothly into the valve hole by its own weight.
Assembly
Ultima Oil Pump Harley
Assembly is in the reverse order of disassembly.
• Assemble the inner rotor and outer rotor with the punched marks on the oil pump cover side.
CAUTION: Before assembly apply new engine oil to the parts as specified.
Oil cooler
Removal and Installation 1. Oil filter 2. Oil cooler bolt 3. Water pipe 4. Water hose 5. Oil cooler 6. O-ring 7. Oil pan 8. Water pipe 9. Relief valve 10. Water drain plug 11. Copper gask ...Ultima Oil Pump Diagram
Other materials:
Checking bulbs
With all doors closed, apply the parking brake and place the ignition switch to the ON position without starting the engine. The following lights will come on: The following lights (if equipped) come on briefly and then go off: If any light fails to come on, it may indicate a burned-out b ...
With all doors closed, apply the parking brake and place the ignition switch to the ON position without starting the engine. The following lights will come on: The following lights (if equipped) come on briefly and then go off: If any light fails to come on, it may indicate a burned-out b ...
Ultima Oil Pump Manual Transmission
Door speaker (coupe)
Description The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio signals before sending them to the door speakers using the audio signal circuits. Diagnosis Procedure 1.HARNESS CHECK 1. Disconnect BOSE speaker amp. connector B121 and suspec ...
Description The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio signals before sending them to the door speakers using the audio signal circuits. Diagnosis Procedure 1.HARNESS CHECK 1. Disconnect BOSE speaker amp. connector B121 and suspec ...
Ultima Oil Pump
B2190, P1610 nats antenna amp
Description Performs ID verification through BCM and keyfob when push-button ignition switch is pressed. Prohibits the release of steering lock or start of engine when an unregistered ID of keyfob is used. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMA ...
Description Performs ID verification through BCM and keyfob when push-button ignition switch is pressed. Prohibits the release of steering lock or start of engine when an unregistered ID of keyfob is used. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMA ...